Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterPicture & Fixed Windows in Brownsville, FL
Picture and fixed windows are permanently sealed units – they don’t open or close – which makes them the most energy-efficient and structurally solid window type available for Brownsville homes. Installation typically runs $350 to $900 per window installed, depending on size, glass type, and impact rating. At Winslow Windows & Doors, Ed Winslow has been installing fixed windows across Brownsville since 2011, and every job comes backed by our Done Right Promise.
If you’d like a free, upfront estimate with no trip charge, call us at (727) 860-0593 – a live person answers every call, day or night. Or browse our full Window Installation in Brownsville page to see everything we handle.
Fixed windows are a surprisingly strong choice for South Florida homes. Because there’s no operating hardware to fail, no weatherstripping to compress and gap over time, and no sash to warp in our subtropical humidity, they hold their seal year after year in ways that operable windows simply can’t match. In Brownsville’s climate – where summer humidity regularly sits above 85% and hurricane season runs half the year – that durability matters more than most homeowners realize until their first picture window quote.
When You Need Picture & Fixed Windows
- Your current fixed window is fogged or showing condensation between the panes. Failed insulated glass units are the most common reason Brownsville homeowners call us about fixed windows. Once the seal breaks, the fog doesn’t clear – the only fix is glass replacement or a full window swap.
- You’re remodeling and want unobstructed views toward Biscayne Bay or a backyard garden. Picture windows are built for exactly this: maximum glass area, zero frame intrusion, and no rail cutting the view in half. We see a lot of these requests in the Westchester-adjacent neighborhoods west of Brownsville where newer construction favors open sight lines.
- You’re replacing an old single-pane window that’s driving up your FPL bill. Single-pane glass in a South Florida home is essentially a heating element in August. A properly installed, impact-rated double-pane fixed window with low-E coating can cut solar heat gain by 40% or more.
- You need to meet Miami-Dade or Broward County impact standards. Brownsville sits within Miami-Dade County’s High-Velocity Hurricane Zone. Any window installation or replacement here must meet the Florida Building Code’s impact or protection requirements. A fixed impact window from a brand like CGI or ES Windows with the right NOA (Notice of Acceptance) satisfies that requirement without the cost of separate shutters.
- Your fixed window frame is cracked, corroded, or showing visible water intrusion at the sill. Aluminum frames in coastal South Florida corrode faster than most people expect. Surface pitting is cosmetic; white oxidation that’s soft to the touch or water staining on the interior drywall means the frame seal has failed and the window needs to come out.
- You’re adding a new wall opening – a home addition, a garage conversion, or a bathroom that needs light without ventilation. New construction openings in Brownsville require permitted work and inspections. We handle the permit coordination so you’re not managing a pile of paperwork between the building department and your contractor.
Our Picture & Fixed Windows Process
- Free in-home measurement and assessment. Every job starts with Ed or one of our uniformed, background-checked technicians coming to your Brownsville home to measure the rough opening, assess the existing frame condition, check for water damage at the sill and header, and talk through glass options. This visit costs you nothing. Upfront pricing. No surprises on the invoice.
- Product selection and permit application. We’ll match you to the right fixed window from our authorized lineup – brands like CGI, ES Windows, CWS, or ECO Window Systems, depending on your opening size, budget, and impact requirements. Once you approve the quote, we pull the necessary Miami-Dade building permits. You don’t chase inspectors; we do.
- Removal of the existing window. Our crew removes the old unit carefully, cutting any existing caulk or sealant lines and extracting the frame without damaging the surrounding stucco or drywall. If we find rot or water damage in the rough opening that wasn’t visible during the assessment, we document it and call you before touching anything – no surprise scope changes without your approval.
- Frame preparation and flashing. This step is where a lot of cut-rate installers skip critical work. We clean the rough opening, apply the correct flashing tape at the sill and corners, and make sure the drainage plane is intact before the new frame goes in. In Brownsville’s rain-heavy summers, a window that’s properly flashed is a window that doesn’t rot your wall over the next decade.
- Installation, shimming, and sealing. The new fixed window is set into the opening, shimmed level and plumb, fastened to the framing at the required intervals per the product’s NOA, and sealed with a Florida Building Code-compliant sealant at the perimeter. Fixed windows carry no operating hardware, so there’s no adjustment of balances or locks – but we do verify the glass sits square in the frame and the seal is continuous before we call it done.
- Inspection, cleanup, and final walkthrough. We call for the county inspection and meet the inspector on-site. Once the work passes, we clean up the job site, remove all packaging and old window debris, and walk you through the finished installation. If anything looks off to you – a caulk line that needs touching up, a question about the glass specs – we address it before we leave. That’s the Done Right Promise in practice, not just in writing.
Picture & Fixed Windows Pricing in Brownsville
Fixed windows in Brownsville generally cost less per unit than comparable operable windows because there’s no hardware, no weatherstripping system, and less labor in the frame assembly. That said, larger picture windows involve heavier glass and more complex handling, which affects the installed price. Here’s an honest breakdown of what you’ll typically see in this market:
| Window Size / Type | Typical Installed Cost (Brownsville) |
|---|---|
| Small fixed window (up to 24″ x 36″), impact-rated, double-pane | $350 – $520 |
| Standard picture window (36″ x 48″ to 48″ x 60″), impact-rated, low-E | $520 – $750 |
| Large picture window (60″ x 72″ and up), impact-rated, low-E | $750 – $1,100 |
| Custom or geometric fixed unit (arched, trapezoid, specialty shape) | $900 – $1,500+ |
| Miami-Dade permit fee (typically separate, varies by valuation) | $80 – $200 per permit |
What moves the price up or down:
- Glass type. Standard impact laminated glass is the baseline. Add a high-performance low-E coating and the glass cost rises 12-18%, but the energy savings on your FPL bill usually recover that in two to four South Florida summers.
- Frame material and finish. Standard white or bronze aluminum frames are the most common in Brownsville’s building stock. Specialty finishes or impact-rated vinyl frames for corrosion resistance in coastal settings add cost.
- Rough opening condition. If we pull an old window and find rotted framing, the repair happens before the new window goes in. We price this separately and transparently – no padding it into a vague “installation” line.
- Floor level and access. A fixed picture window on a ground-floor exterior wall is a different job than a large fixed unit on a second-story addition. Lift equipment or staging affects labor cost.
- Number of units. Multi-window projects typically see reduced per-unit pricing. If you’re replacing three or four fixed windows in one visit, the mobilization cost spreads across the job.
Seniors and veterans receive a permanent 10% discount on all our work – no expiration date, no fine print. If you’ve already received a written estimate from another contractor, we’ll give you a free second opinion on it. Call (727) 860-0593 for an exact quote – estimates are free and there’s no trip charge within Miami-Dade County.
Why Brownsville Homeowners Choose Winslow for Fixed Windows
Brownsville sits in one of the most demanding window installation near me in Brownsville, FL markets in the country. Miami-Dade County’s High-Velocity Hurricane Zone designation means every window we install has to meet strict product approval requirements – no exceptions, no workarounds. National chains that operate across 30 states don’t always have installers who know the specific NOA and flashing requirements that Miami-Dade inspectors look for. We do, because this is the only market we work in.
Ed Winslow’s name is on this business, and on every job we do in Brownsville. That’s not a marketing line – it means when a neighbor in Grapeland Heights or Coral Terrace has a question about a job we did two years ago, they call the same number and reach the same team. We’ve been doing this since 2011, and we plan to be doing it in 2041. The Done Right Promise isn’t a gimmick; it’s the only way to run a business you actually stand behind.
We’re authorized installers for CGI, ES Windows, CWS, and ECO Window Systems, among others – eight brands in total. That breadth matters for fixed windows because the right product depends on your opening, your impact rating needs, and your energy goals, whether that’s single & double hung windows or another style. We don’t sell you the window we happen to have in stock; we source what fits your home.
Every technician who shows up at your door is background-checked and arrives in uniform. You’ll know who’s coming before the truck pulls up. And when you call with a question – at 7 a.m. or midnight – a live person answers. No voicemail loop, no callback-by-the-next-business-day. That’s how we’ve built a reputation in Brownsville over 15 years, and it’s not something a ticket-number chain can replicate.
From our home base in South Florida, we serve the communities around Brownsville as a true local operation – not a franchise with local branding over a national call center.
FAQs – Picture & Fixed Windows in Brownsville
How much does a picture window installation cost in Brownsville, FL?
A standard installed picture window in Brownsville runs $520 to $750 for a mid-size unit (roughly 36″ x 48″ to 48″ x 60″) with impact-rated, low-E glass. Smaller fixed windows start around $350 installed; large custom units can reach $1,100 or more. Miami-Dade permit fees are typically $80 to $200 and are pulled by us. Call (727) 860-0593 for a free exact quote – no trip charge within the county.
Do fixed windows meet Miami-Dade’s hurricane impact requirements?
Yes – a fixed or picture window with an approved impact laminated glass unit from a Miami-Dade Notice of Acceptance (NOA) product, installed per the manufacturer’s specs and the Florida Building Code, fully satisfies the High-Velocity Hurricane Zone protection requirements. Brands like CGI and ES Windows manufacture fixed units specifically tested and approved for Miami-Dade conditions. We handle the permit and inspection so you know the installation is code-compliant, not just vendor-claimed.
Can a foggy or cloudy fixed window be repaired without replacing the whole frame?
In many cases, yes. If the frame is structurally sound and the fog is caused by a failed insulated glass unit (IGU) seal, we can replace just the glass unit inside the existing frame rather than removing and reinstalling the entire window. This is less disruptive and usually less expensive. We assess this during the free in-home visit – if the frame has corrosion, water infiltration, or isn’t up to current impact code, we’ll tell you straight and explain why a full replacement makes more sense long-term.
How long does a fixed window installation take in Brownsville?
Most single fixed window installations in Brownsville are completed in two to four hours on the installation day itself. The timeline that takes longer is the permitting and product lead time before we start: Miami-Dade permits typically take one to two weeks for approval, and window lead times from the manufacturer vary by product and size, generally running two to four weeks. We give you a realistic schedule before you commit – not an optimistic one we can’t keep.
Key Takeaways
- Fixed and picture windows are permanently sealed units – more energy-efficient and structurally sound than comparable operable windows in Brownsville’s climate.
- Installed costs in Brownsville typically run $350 to $1,100+ depending on size, glass type, and frame specs.
- Miami-Dade’s High-Velocity Hurricane Zone requires NOA-compliant impact products – we install brands like CGI and ES Windows that meet this standard.
- Winslow Windows & Doors has been locally owned and operated by Ed Winslow in South Florida since 2011, with a published address and license number.
- Every job is backed by the Done Right Promise. If it’s not right, we make it right – no statute of limitations on our accountability.
- Seniors and veterans receive a permanent 10% discount. Free second opinions on written estimates. No trip charge within Miami-Dade County.
- Live person answers at (727) 860-0593, 24 hours a day, 7 days a week.
Get a Free Estimate on Picture & Fixed Windows in Brownsville
If you’re ready to upgrade a fogged fixed window, add a 3-panel sliding (3-lite roller) windows or picture window to a new wall opening, or replace aging single-pane glass before next hurricane season, call (727) 860-0593. Ed Winslow’s team will schedule a free in-home measurement, walk you through your options honestly, and give you a written upfront price before any work begins. No trip charge within Miami-Dade County. No pressure. Just a straightforward conversation with people who know Brownsville homes and stand behind every window they install.
We’re the one down the road – and we’ll still be here when you need us.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Brownsville since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.